Prokit's Industries MT-1505 User Manual
Page 4
3
Turning the Meter On and Off
Press the Power button for approximately 3 seconds to turn
the meter on.
To turn the meter off, press the Power button until the
display goes blank.
Making Measurements
All measurements described in this manual use the Red test
lead for positive (+) polarity and Black test lead for Ground
reference (-) unless otherwise specified
Auto-Select Mode
The Auto-Select feature automatically selects measurement
function of V dc, V ac, or resistance based on the input via
the test leads.
With no input, the meter displays Auto when it is ready.
With no voltage signal but a resistance below 40MΩis
present, the meter displays the resistance value, this
function is auto-ranging
When a signal above the threshold of 0.6 V dc or 1.6V ac
up to the rated 600 V is present, the meter displays the
appropriate voltage value in dc or ac, whichever larger in
peak magnitude, this function is auto-ranging
The Auto-Select test With High input impedance: 10MΩ
which ensure the Best accuracy.
Overload-Alert Feature
When above rated 600 V is present, the meter displays OL
with a warning beep tone. Disconnect the test leads from the
signal immediately to avoid hazards.