Prokit's Industries NT-6560 - Manual (Page 9)

calculated and displayed. The last individual measured value is not
displayed.
Indirect measurement determining a distance using 2
measurements
- 8 -
when measuring heights that require the
measurement of two or three
measurements as following step:
Press this button
, the display
shows. The laser is switched on.
Aim at the upper point (1) and trigger
the measurement. After the first
measurement the value is adopted, the
second distance to be measured flashes in the symbol. Keep the
instrument as horizontal as possible. The tool default
measurement result is the horizontal value. Fig.F
Press this button to trigger the measurement; the measured
value is displayed in the second line. At the same time, the
result is displayed in the summary line.
Indirect Measurement - determining a distance using 3
measurements
圖示 G
Press this button twice; the display
shows the following symbol. The laser is
switched on.
Aim at the upper point (1) and trigger the
measurement. After the first measurement
the value is adopted, keep the instrument
as horizontal as possible, the tools default
the measurement result is the horizontal
value
The display shows in the second line,
Aim at the middle point (2) and Press
measurement button.