Prokit's Industries NT-3200 - Manual (Page 2)

Thank you for purchasing the Pro’sKit’ Mini Pocket Tester with
various adaptors. The unit is a Mini Pocket Tester for identify-
ing cables in a Multi Dwelling Unit. The cable installer uses
the unit to place a DC current through one end of the desired
cable and identifies the cable at the end with the detachable
Tone Detector. Before using the Mini Pocket Tester and vari-
ous adaptors, please read the following manual completely.
Features and Benefits
Tones out cables by inserting a DC current into a coaxial cable
at one end and detects that cable from others in a remote loca-
tion by attaching the audio toning detector to the other end.
Features
• Improved head design with rugged push-on male F connector
• Easily viewable short circuit indicator
• Loud audio level for noisy environments
• Time-saving push-on female connector on audible toner
• Easily stores in shirt pocket or tool pouch
The unit is equipped with a short circuit detector. The LED is
located on the head of the transmitter section. If a DC short
circuit exists in the cable, the LED will light up. Many high qual-
ity splitters used for MDU application are short circuit to DC;
therefore, if these splitters are in the cable line, the LED will
light up. With the additional wide range of optional adaptors, it
can test telephone, LAN, audio, security, or virtually any other
type of wire or cable easily.
Contents
• NT-30 Mini Pocket Tester
• x RJ45 to F male
• x F-type female to BNC female • x RJ11 to F male
• x F-type male to F-type male • x F-type female to RCA male
• x BNC female to F-type male • x F female to PAL Female
• x RCA female to F-type male • x F female to F Push-on male
• x F-type female to BNC male
• 1 x F-type female to F-type female