Prokit's Industries MT-1280 - Manual (Page 4)

200mA ±(1.2%+8d) 100uA
20A ±(2.0%+5d) 10mA
• Max. input volt drop: 200mV
• Max. input current: 20A (the test time should be in 10
seconds)
• 0.2A/250V Self-resettable fuse; 20A/250V fast-blown fuse
2-2-4.ACA
RANGE ACCURACY RESOLUTION
20mA ±(1.0%+5d) 10uA
200mA ±(2.0%+5d) 100uA
20A ±(3.0%+10d) 10mA
• Max. measuring volt drop: 200mV
• Max. input current: 20A (the test time should be in 10
seconds)
• 0.2A/250V Self-resettable fuse ; 20A/250V fast-blown fuse
• Frequency response: (40~200)Hz
• Display: sine wave RMS (mean value response)
2-2-5. RESISTANCE(Ω)
RANGE ACCURACY RESOLUTION
200Ω ±(0.8%+5d) 0.1Ω
2kΩ 1Ω
20kΩ 10Ω
200kΩ
±(0.8%+3d)
100Ω
20MΩ ±(1.0%+25d) 10kΩ
200MΩ ±(5.0%+10d) 100kΩ
• Open voltage: less than 0.7V
• Overload protection: 250V DC and AC peak value
NOTE: at 200Ω range, the test leads should be short-circuit,
and measure the down-lead resistance, then, subtract from
the real measuring.
WARNING: DO NOT input any voltage at resistance
range for safety!
2-2-6. CAPACITANCE (C)
3