beautypg.com

KIA Sedona 2009 User Manual

Page 271

background image

4 23

Driving your vehicle

Non-operational conditions of
rear parking assist system

Rear parking assist system may not
operate normally when:

1. Moisture is frozen to the sensor. (It will

operate normally when moisture
melts.)

2. Sensor is covered with foreign matter,

such as snow or water, or the sensor
cover is blocked. (It will operate nor-
mally when the material is removed or
the sensor is no longer blocked.)

3. Driving on uneven road surfaces

(unpaved roads, gravel, bumps, gradi-
ent).

4. Objects generating excessive noise

(vehicle horns, loud motorcycle
engines, or truck air brakes) are within
range of the sensor.

5. Heavy rain or water spray exists.
6. Wireless transmitters or mobile phones

are within range of the sensor.

7. Sensor is covered with snow.
8. Trailer towing

Detecting range may decrease when:

1. Sensor is stained with foreign matter

such as snow or water. (Sensing range
will return to normal when removed.)

2. Outside air temperature is extremely

hot or cold.

Following objects may not be recog-
nized by the sensor:

1. Sharp or slim objects such as ropes,

chains or small poles.

2. Objects which tend to absorb sensor

frequency such as clothes, spongy
material or snow.

3. Undetectable objects smaller than 1 m

(40 in.) and narrower than 14 cm (6 in.)
in diameter.

CAUTION

1. The rear parking assist system

may not sound sequentially
depending on the speed and
shapes of the objects detected.

2. The rear parking assist system

may malfunction if the vehicle
bumper height or sensor installa-
tion has been modified or dam-
aged. Any non-factory installed
equipment or accessories may
also interfere with the sensor per-
formance.

3. Sensor may not recognize

objects less than 40 cm (15 in.)
from the sensor, or it may sense
an incorrect distance. Use cau-
tion.

4. When sensor is frozen or stained

with snow, dirt, or water, sensor
may be inoperative until the
stains are removed using a soft
cloth.

5. Do not push, scratch or strike the

sensor. Sensor damage could
occur.