Sena Bluetooth SPH10 v4.2 User's Guide - Manual (Page 22)

23
SPH10
English
on the mobile phone keypad.
- Tap the Phone Button in stand-by mode to activate
the voice dialing of your mobile phone. For this,
the voice dialing feature must be available on
the mobile phone. Refer to your mobile phone
manual for further instruction.
- To redial the last number, double tap the Phone
Button in stand-by mode. You will hear a voice
prompt saying “Last number redial”.
Answer Tap Phone Button or Tap Jog Dial
or Say “Hello”
End Tap Phone Button or Press Jog
Dial for 2”
Reject Press Jog Dial for 2”
Transfer Press Phone Button for 2”
Call Use phone keypad
Redial Double tap Phone Button
Voice Command Tap Phone Button
Mobile Phone Call Button Operations
Note:
1. If you are using multipoint mobile phone connection
and you have an incoming call from the second phone
during the call of the first phone, then you may still
receive the call from second phone. In this case, the
call from the first phone is on waiting mode. If you end
a call, then it will automatically guide you to the first
phone call.
2. If you are using multipoint connection of mobile phone
and GPS, you may not be able to listen to the GPS voice
instruction during the phone call.