Sena Bluetooth SPH10 v4.2 User's Guide - Manual (Page 20)

21
SPH10
English 11. STEREO MUSIC
You can listen to stereo music in two ways: with the
enclosed stereo audio cable or by Bluetooth wireless
stereo.
11.1 By Stereo Audio Cable
Plug your stereo MP3 player directly to the SPH10 by
using the enclosed stereo audio jack cable. To adjust
the volume, rotate the Jog Dial on the headset. You
may adjust the volume on the MP3 player also.
MP3 Jack
11.2 By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the
SPH10 by following the “Bluetooth Stereo Device
Pairing” procedures described in the 6.2 chapter.
The SPH10 supports the Audio/Video Remote Control
Profile (AVRCP), so if your Bluetooth audio device
also supports the AVRCP, you can use the SPH10 to
remotely control music playback.
You not only can adjust the volume but also use
the functions such as play, pause, next track and
previous track.
1. To adjust the volume, rotate the Jog Dial.
2. To play or pause music, press and hold the Jog
Dial for 1 second until you hear a double beep.