Sena Bluetooth SPH10 v4.2 User's Guide - Manual (Page 15)

SPH10
16
8. INTERCOM PAIRING
8.1 Pairing with Other SPH10 Headsets for
Intercom Conversation
The SPH10 can be paired with up to three other
headsets for Bluetooth intercom conversation.
1. Turn on the two SPH10 headsets (A and B) that you
would like to pair with each other.
2. Press and hold the Jog Dial of the headset A and B
for 5 seconds until red LEDs of the both units start
to flash rapidly. You will hear a voice prompt saying
“Intercom pairing”.
3. Simply tap the Jog Dial of any one of the two
headsets A or B (It doesn’t matter that you choose A
or B.) and wait until the LEDs of both headsets turn
to blue and intercom connection is automatically
established. The two SPH10 headsets A and B are
paired with each other for intercom conversation.
If the pairing process is not completed within one
minute, the SPH10 will return to stand-by mode.
A
B D
C
Pairing A & B
4. You can make other pairings between the headset
A and C, and between the headset A and D by
following the same procedure as above.
Pairing A & C Pairing A & D
A
B D
C
A
B D
C