beautypg.com

Software installation on your pc – PowerWalker VI 1000 User Manual

Page 9

background image

EN 

V: Audio Indicator  
 

Audible Alarm 

Situation 

Sounding every 10 seconds 

 

Backup Mode 

Sounding every 1 second 

Battery Low 

Sounding every 0.5 seconds 

Overload 

continuous sounding 

Faulty 

 

 

7. Software Installation on your PC 

 

Connected  by  USB  to  a  PC  or  notebook,  the  Software  enables  communication  between  the  UPS  and  the 

computer.  The  UPS  software  monitors  the  status  of  the  UPS,  shuts  down  the  system  before  the  UPS  is 

exhausted and can remotely observe the UPS via the Network (enabling users to manage their system more 

effectively). Upon AC failure or UPS battery low, UPS takes all necessary actions without intervention from the 

system administrator. In addition to automatic file saving and system shut‐down functions, it can also send 

warning messages via pager, e‐mail etc. 

 

Use the bundled CD and follow the on‐screen instructions to install the software SmartPower. 

After the software is successfully installed, the communication with UPS has been established and an 

orange icon will appear in the system tray.   

 

 

 

Double‐click the icon to use the monitor software (as above).     

You can schedule UPS shutdown/start‐up and monitor UPS status through PC. 

Detail instructions please refer to the e‐manual in the software.  

 

Check 

www.powerwalker.com/samrtpower.html

 from time to time to get the latest  

            version of monitoring software.