Installation and initial startup – PowerWalker VI 1000 User Manual
Page 6
EN
IEC Outlets /
Schuko outlets
AC input
Breaker
Modem or phone surge protection
RS‐232 port
s
USB port
IEC Outlets /
Schuko outlets
AC input
Breaker
Modem or phone surge protection
RS‐232 port
s
USB port
4. Installation and Initial Startup
Before installation, please inspect the unit. Be sure that nothing is damaged
.
I: Placement & Storage Conditions
Install the UPS in a protected area that is free of excessive dust and has adequate air flow. Please place the
UPS away from other units at least 20 cm to avoid interference. Do NOT operate the UPS where the
temperature exceeds 0‐40° C and the humidity is over 0‐90 % RH.