Peterson StroboPlus HD Metronome Manual - Manual (Page 4)

How to Edit Parameters via the User Interface
The StroboPlus has a very intuitive user interface that makes it easy to quickly change any parameter that you
desire. A single Select Knob is used first to determine which parameter will be adjusted, and then to actually
adjust the value of that parameter through this two-step process:
Select the Parameter
Rotating the Select Knob sequences through the available parameters. The current parameter is indicated by its
value blinking. Pressing the Select Knob enables the Edit Menu for the parameter you have chosen.
Edit the Parameter
The parameter value to be edited will blink. Rotating the Select Knob changes the value of the blinking
parameter. Pressing the Select Knob now will exit the Edit Menu and return the screen to normal operation. In
the metronome mode, Tempo is the default/normal setting that the StroboPlus returns to after a few seconds
with no adjustments by the user.
From the normal screen (with nothing blinking), pressing the Select Knob will activate the Edit Menu for
Tempo (or the most recently selected parameter).
Advanced User Controls
Locking the Active Edit Menu
To prevent the automatic timeout and closing of a parameter’s Edit Menu, first activate the Edit Menu. Then
press & hold the Select Knob for 2 seconds. The screen will return to normal but the selected parameter will
continue to blink and the Select Knob will continue to edit that parameter indefinitely. The automatic menu time
out will be disabled. To exit the locked Edit Menu, press the Select Knob until the screen returns to normal.
Note: Locking a parameter in the Edit Menu can be handy when you desire to edit that parameter over a
period of time.
Selectable Parameters
This manual only covers the metronome functions. You received a printed tuner manual with the StroboPlus
and you can also view one online at http://www.petersontuners.com/media/pdf/StroboPlus_OM.pdf .