Ordering information, Pin description (high-side, lm3812), Pin description (low-side, lm3813) – Rainbow Electronics LM3813 User Manual
Page 2
Ordering Information
Order No.
#
Sense
Range
Sampling
Interval*
Sensing
Method
NS
Package
Number
‡
Package
Type
Supplied As:
LM3812M-1.0
±
1A
50 ms
High-side
M08A
SO-8
95 units in Rails
LM3812MX-1.0
±
1A
50 ms
High-side
M08A
SO-8
2.5k units on Tape and Reel
LM3812M-7.0
±
7A
50 ms
High-side
M08A
SO-8
95 units in Rails
LM3812MX-7.0
±
7A
50 ms
High-side
M08A
SO-8
2.5k units on Tape and Reel
LM3813M-1.0
±
1A
50 ms
Low-side
M08A
SO-8
95 units in Rails
LM3813MX-1.0
±
1A
50 ms
Low-side
M08A
SO-8
2.5k units on Tape and Reel
LM3813M-7.0
±
7A
50 ms
Low-side
M08A
SO-8
95 units in Rails
LM3813MX-7.0
±
7A
50 ms
Low-side
M08A
SO-8
2.5k units on Tape and Reel
#
Suffix M indicates that the part is available in Surface
Mount package. Suffix X indicates that the part is available in
2.5k units on Tape and Reel.
* Current is sampled over a fixed interval. The average
current during this interval is indicated by the duty cycle of
the PWM output during next interval.
‡
The Package code M08A is internal to National Semicon-
ductor and indicates an 8-lead surface mount package,
SO-8.
Pin Description (High-Side, LM3812)
Pin
Name
Function
1
SENSE+, V
DD
High side of internal current sense, also supply voltage.
2
SENSE−
Low side of internal current sense.
3
FLTR+
Filter input — provides anti-aliasing for delta sigma modulator.
4
FLTR−
Filter input.
5
SD
Shutdown pin. Connected to V
DD
through a pull up resistor for normal operation. When
low, the IC goes into a low current mode (typically 3 µA).
6
PWM
PWM output indicates the current magnitude and direction.
7
GND
Ground
8
GND
Ground
Pin Description (Low-Side, LM3813)
Pin
Name
Function
1
SENSE+, GND
High side of internal current sense, also ground.
2
SENSE−
Low side of internal current sense.
3
FLTR+
Filter input – provides anti-aliasing for delta sigma modulator.
4
FLTR−
Filter input.
5
SD
Shutdown pin. Connected to V
DD
through a pull up resistor for normal operation. When
low, the IC goes into a low current mode (typically 3 µA).
6
PWM
PWM output indicates the current magnitude and direction.
7
GND
Ground
8
V
DD
V
DD
(supply)
LM3812/LM3813
www.national.com
2