Rainbow Electronics DS9034PCX User Manual
Ds9034pcx powercap™ with crystal

1 of 3
110999
FEATURES
Provides 10 years of battery backup power for
Nonvolatile Timekeeping RAMs in the
PowerCap Module package (PCM)
Snaps directly onto surface-mounted
PowerCap Module Boards
Detachment feature allows easy removal
Compatible with these 34-pin PowerCap
Module boards:
- DS1386P
- DS1543P/YP/WP
- DS1486P
- DS1553P/YP/WP
- DS1643P
- DS1554P/YP/WP
- DS1644P
- DS1556P/YP/WP
- DS1646P
- DS1557P/YP/WP
- DS1647P
- DS1744P/YP/WP
- DS1743P/WP
- DS1746P/YP/WP
- DS1251YP/WP - DS1747P/YP/WP
- DS1248YP/WP
- DS1244YP/WP
ABSOLUTE MAXIMUM RATINGS*
Operating Temperature -40
°
C TO +85
°
C
Storage Temperature
-40
°
C TO +85
°
C
PIN DESCRIPTION
V
BAT
- +3 Volt Battery Output
GND -
Ground
X1, X2
- 32.768 kHz Crystal Connections
CRYSTAL CHARACTERISTICS
Nominal Frequency
32.768 kHz
Load Capacitance
6 pF
BATTERY CHARACTERISTICS
Nominal Voltage
3V
Nominal Capacity
130 mAhr
Chemistry Li(CF)x
Data Retention Life
10 Years (25
°
C)
* This is a stress rating only and functional
operation of the device at these or any other
conditions above those indicated in the operation
sections of this specification is not implied.
Exposure to absolute maximum rating conditions
for extended periods of time may affect
reliability.
DESCRIPTION
The DS9034PCX PowerCap is designed to be a lithium power source for Nonvolatile Time-keeping
RAMs in Dallas Semiconductor’s directly surface-mountable PowerCap Module (PCM) package. After a
PowerCap Module Board has been soldered in place and cleaned, the DS9034PCX PowerCap is placed
on top of the PCM Board to form a complete PowerCap Module package. The PowerCap is keyed to
prevent incorrect attachment. The DS9034PCX can be easily removed by inserting a regular screwdriver
into a detachment feature and prying gently outward and upward to release the PowerCap from the
PowerCap Module Board.
DS9034PCX
PowerCap™ with Crystal
www.dalsemi.com