Rainbow Electronics MAX5547 - Manual

General Description
The MAX5547 dual, 10-bit, dual range, digital-to-analog
converter (DAC) sinks up to 3.6mA of current, making it
ideal for laser-driver-control applications. Parallel the
MAX5547 outputs to sink higher current (up to 7.2mA
max). Operating from a single +2.7V to +5.25V
supply, the MAX5547 typically consumes 1mA
(internal reference).
The MAX5547 operates from a precision +2.5V internal
4ppm/°C reference or an external reference in the
+2.45V to +2.55V range. The maximum full-scale cur-
rent-sink range is software programmable to 3.6mA or
1.2mA for each DAC. A 10MHz SPI™-compatible serial
interface configures the device.
The MAX5547 is available in a 3mm x 3mm x 0.8mm 8-
pin TDFN package and is specified over the -40°C to
+85°C extended temperature range.
Applications
Laser-Driver Control
Pin-Diode Bias Currents
Modulation Currents
Average Power
Extinction Ratios
Features
♦ Dual Current-Sink DACs
♦ 10-Bit Resolution
♦ Two Software-Programmable Full-Scale Current
Ranges: 3.6mA or 1.2mA
♦ Parallelable Outputs for Up to 7.2mA (max)
♦ +2.5V Internal Reference Drifts Only 4ppm/°C
♦ +2.7V to +5.25V Single-Supply Operation
♦ INL: ±4 LSB (1.2mA Output)
♦ DNL: ±0.75 LSB (Guaranteed Monotonic)
♦ Low +0.8V Output Compliance
♦ Ultra-Small, 3mm x 3mm x 0.8mm, 8-Pin TDFN
Package
MAX5547
Dual, 10-Bit, Current-Sink Output DAC
________________________________________________________________ Maxim Integrated Products 1
19-3988; Rev 0; 2/06
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Ordering Information
+2.7V TO +5.25V
+2.5V
+3.3V
OUTA
OUTB
CS DIN SCLK
MICROCONTROLLER WITH ADC
REF
I
I
BIASSET
MODSET
DIS BC_MON
OUT-
OUT+
BIAS
AIN0
AIN1
AIN2
CS MOSI SCLK
GND
GND
V CC
REF
FERRITE
BEAD
I/O1 I/O2 I/O3
TX_DISABLE
MOD-DEF1
MOD-DEF2
+3.3V
GND
V CC
+3.3V
+3.3V
MAX5547 MAX3736
V DD
Typical Operating Circuit
PART TEMP RANGE
PIN-
PACKAGE TOP
MARK
PKG
CODE
MAX5547ETA -40°C to +85°C 8 TDFN-EP* APF T833-2
SPI is a trademark of Motorola, Inc.
*EP = Exposed pad.
Pin Configuration appears at end of data sheet.