Rainbow Electronics MAX4951 - Manual (Page 3)

MAX4951
SATA I/SATA II Bidirectional Re-Driver
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(V CC = +3.0V to +3.6V, C L = 10nF, R L = 50
Ω, T
A = 0°C to +70°C, unless otherwise noted. Typical values are at V CC = +3.3V, T A = +25°C.)
(Note 3)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
f = 150MHz to 300MHz -32 -14
f = 300MHz to 600MHz -26 -8
f = 600MHz to 1200MHz -21 -6
f = 1.2GHz to 2.4GHz -16 -6
f = 2.4GHz to 3.0GHz -15 -3
Differential Output Return Loss
(Note 4)
RL TX-DIFF
f = 3.0GHz to 5.0GHz -13 -1
dB
f = 150MHz to 300MHz -8
f = 300MHz to 600MHz -5
f = 600MHz to 1200MHz -2
f = 1.2GHz to 2.4GHz -2
f = 2.4GHz to 3.0GHz -2
Common-Mode Output Return Loss
(Note 4)
RL TX-CM
f = 3.0GHz to 5.0GHz -1
dB
Differential Input Signal Range V
RX-DFF-PP
SATA 1.5Gbps/3.0Gbps 220 1600 mV
P-P
BA = BB = GND 450 525 650
Differential Output Swing V TX-DFF-PP f = 750MHz
BA = BB = V CC 770 930 1144
mV P-P
Propagation Delay t PD 240 ps
Output Rise/Fall Time t R (Notes 4, 5) 60 ps
Deterministic Jitter T TX-DJ-DFF Up to 6.0Gbps (Notes 4, 6) 15 ps P-P
Random Jitter T TX-RJ-DFF Up to 6.0Gbps (Notes 4, 6) 1.8 ps RMS
OOB Detector Threshold V TH-OOB SATA OOB 50 150 mV P-P
OOB Output Startup/Shutdown Time t
OOB
(Note 7) 2 5 ns
BA = BB = GND -35
Crosstalk CTK f ≤ 1.5GHz
BA = BB = V CC -30
dB
LOGIC INPUT
Input Logic-High V IH 1.4 V
Input Logic-Low V IL 0.6 V
Input Logic Hysteresis V HYST 0.1 V
ESD PROTECTION
All Pins Human Body Model ±5.5 kV
Note 3: All devices are 100% production tested at T A = +70°C. All temperature limits are guaranteed by design.
Note 4: Guaranteed by design.
Note 5: Rise and fall times are measured using 20% and 80% levels.
Note 6: DJ measured using K28.5 pattern; RJ measured using K28.7 pattern.
Note 7: Total time for OOB detection circuit to enable/squelch the output.