Toneprints and presets – TC Electronic Flashback X4 Delay User Manual

Page 25

Text mode
Original mode

TonePrints and presets

When you have stored a preset that is using a TonePrint, you
can upload/beam a new TonePrint to that TonePrint slot without
affecting the preset. This means that the Flashback X4 Delay &
Looper effectively gives you access to seven TonePrints, like this:

– Upload or beam four TonePrints to the four TonePrints slots

of the Flashback X4 Delay & Looper (see page 14).

– Switch to TonePrint slot 1, adjust delay settings and store the

results as Preset A.

– Switch to TonePrint slot 2, adjust delay settings and store the

results as Preset B.

– Switch to TonePrint slot 3, adjust delay settings and store the

results as Preset C.

– Load four new TonePrints into the four TonePrints slots of the

delay type selector.

You now have access to seven TonePrints – those in the four Tone-
Print slots and those stored as a part of presets A, B and C.