TC Electronic BG250-210 - Manual (Page 6)

Important safety instructions
2
exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
Warning
■ To reduce the risk of fire or electrical shock, do not
expose this device to dripping or splashing and en-
sure that no objects filled with liquids, such as vas-
es, are placed on the device.
■ This device must be earthed.
■ Use a three wire grounding type line cord like the
one supplied with the product.
■ Be advised that different operating voltages require
the use of different types of line cord and attachment
plugs.
■ Check the voltage in your area and use the correct
type. Please refer to the following table:
Voltage Line plug
according to standard
110-125 V UL817 and CSA C22.2 no 42.
Voltage Line plug
according to standard
220-230 V CEE 7 page VII, SR section 107-2-D1/
IEC 83 page C4.
240 V BS 1363 of 1984. Specification for
13A fused plugs and switched and un-
switched socket outlets.
■ This device should be installed near the socket out-
let and disconnection of the device should be easily
accessible.
■ To completely disconnect from AC mains, discon-
nect the power supply cord from the AC receptacle.
■ The mains plug of the power supply shall remain
readily operable.
■ Do not install this device in a confined space.
■ Do not open the device – risk of electric shock in-
side.