How to proceed in protection mode, Links – TC Electronic BG250-210 User Manual
Page 19
Links
15
■ if the amplifier is used in an environment that is too
hot.
■ if proper ventilation is not ensured.
In Protection mode, the speaker outputs are shut off to
prevent speaker damage. However, the balanced out-
put still passes audio.
How to proceed in Protection mode
■ If the amplifier does not automatically recover from
Protection mode and feels hot, try turning off the
amplifier for a minute to let it cool. Ensure sufficient
ventilation.
■ Ensure that your speaker cable is not defect, as
such a defect could cause a short circuit.
■ Turn on the amplifier again.
If these steps do not solve the problem and the Tuner
LEDs continue flashing, you will have to send the ampli-
fier to a qualified service center for inspection.
Links
■ TC Electronic Bass Products:
■ TonePrint Bass:
■ TC Support:
support
■ TC @ Facebook: