RocketFish RF-WSP313 - User Manual - Manual (Page 12)

12
Reconnecting your device:
If you move out of range or turn off the Bluetooth feature on your
Bluetooth device, the Bluetooth speaker disconnects from your
device. When this happens, the LED will slowly blink on and off.
To restore the connection:
• Move the music device back into range (within 33 feet), and make
sure there is a clear line of sight and there are no obstructions
between the Bluetooth speaker and the device.
The connection is automatically reestablished and the LED turns
on.
Note: The auto connect feature may not work with some Bluetooth devices, if this
occurs, you need to select the Bluetooth speaker from the list of available players on
your device.
Connecting to a different device:
To switch from one device to another:
1 On your Bluetooth device you are currently connected to, turn off
the Bluetooth function or unpair the Bluetooth speaker in your
Bluetooth device list.
The Bluetooth speaker can now be connected to another
Bluetooth device.
2 Follow the section “Pairing your devices using Bluetooth” to
connect a new device.
To listen to music:
3 Turn on the system. Make sure that the wireless speaker and your
Bluetooth device are paired.
4 Select the music you want to play, then press Play on the
connected device.
Notes:
If the system has no sound output, make sure that the volume level of your Bluetooth
device is not set to the minimum or muted.
Make sure that the audio cable has been removed from the AUX IN jack.
RF-WSP313_13-0633_MAN_V1_ENG.fm Page 12 Friday, August 9, 2013 2:02 PM