beautypg.com

RocketFish RF-SPEHP3 - Quick Setup Guide User Manual

Rf-spehp3

background image

Écouteur

Embout auriculaire

Sport Neckband Headphones

Écouteurs serre-nuque sport

Auriculares deportivos con banda

de sujeción para la nuca

RF-SPEHP3

QUICK SETUP GUIDE / GUIDE D’INSTALLATION RAPIDE /

GUÍA DE INSTALACIÓN RÁPIDA

We appreciate your purchasing these Rocketfish Sport Neckband
Headphones and hope you really enjoy using them.

Package contents

• Neckband Headphones

• Earphone tips 3 pairs provided, including small, medium, and large.

Medium tips come pre-installed)

• Cable clip

Quick Setup Guide

Checking for fit

To determine if you have the right size tip:

1 Insert the earphone into your ear.

2 Tilt the earphone back until it is secure.

Choose the tips that fit you comfortably and rest securely in your ear.

Changing earphone tips

Select the size of earphone tip that provides you with the best
comfort and fit.

1 Gently peel back the edges of the attached earphone tip, using care

not to tear the tip.

2 Position the opening of the new tip over the earphone.

3 Press the base of the earphone tip over the base of the earphone

until the tip feels secured.

Putting on the headphones

Put the headphones on as shown below by wrapping them behind
the head.

For optimum listening, use the supplied earphone tips.

Adjusting the headphones

After placing the headphones behind your head, turn on the
sound and adjust the headphones for comfort and optimum
listening.

Cleaning the headphones

Caution: Improper cleaning can damage the headphones.

Contact with any liquid under pressure, or extended contact with
any liquid, can cause it to seep into the earphone housing,
resulting in damage to the earphone.

• Remove the earbud tips from the earphones.

• Use a cloth to carefully remove buildup from the earphones and

earphone tips.

• Do not use any solvents or cleansing agents.

• Do not immerse the earphones into water.

• Do not expose the earphones to excessive water pressure.

• Allow the earphones and earphone tips to air dry at room

temperature.

SAFETY: Important safety instructions

• Listening at high volume levels for long periods of time can lead

to permanent hearing loss.

• The earphones contain magnets that generate a magnetic field

which could cause interference with cardiac pacemakers and
implanted defibrillators. Keep the earphones at least 1.2" (3 cm)
from cardiac pacemakers or implanted defibrillators.

In order to prevent accidents:

• Do not wear the headphones in an environment that requires

your special attention (e.g. in traffic).

• Keep the headphones and accessory parts out of reach of

children who could swallow smaller pieces.

In order to prevent damage to the headphones:

• Do not heat the headphones (hairdryer, heating, extended

exposure to sunlight, etc.).

• Do not store wet headphones in a bag.

One-year limited warranty

Visit www.rocketfishproducts.com for details.

Contact Rocketfish:

For customer service, call 1-800-620-2790
www.rocketfishproducts.com

© 2011 BBY Solutions, Inc. All Rights Reserved.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and
brand names are trademarks of their respective owners.

Nous vous remercions de votre achat de ces écouteurs
serre-nuque sport Rocketfish et souhaitons qu’ils vous donnent
entière satisfaction.

Contenu de l’emballage

• Écouteurs serre-nuque

• 3 paires d’embouts auriculaires fournies (tailles petite, moyenne

et grande). Les embouts moyens sont pré-installés

• Agrafe de câbles

Guide d’installation rapide

Quel est l’embout le mieux adapté ?

Pour déterminer le type d’embout le mieux adapté :

1 Insérer l’écouteur dans l’oreille.

2 Incliner l’écouteur vers l’arrière jusqu’à ce qu’il soit en place.

Choisir l’embout qui est le plus confortable et s’adapte le mieux à
l’oreille.

Pour changer un embout auriculaire

Sélectionner la taille d’embout qui offre le meilleur confort.

1 Déplier délicatement les bords de l’écouteur en veillant à ne pas

le déchirer.

2 Positionner l’ouverture du nouvel embout sur l’écouteur.

3 Appuyer sur la base de l’embout auriculaire sur la base de

l’écouteur jusqu’à ce que l’embout soit en place.

Mettre l’écouteur serre-nuque en place

Mettre l’écouteur serre-nuque tel qu’illustré ci-dessous en le
passant par dessus la tête.

Pour une écoute optimale, utiliser les embouts auriculaires fournis.

Earphone

Earphone tip