beautypg.com

Board installation – Cobalt Digital COMPASS 9253 2x4 AES Audio Distribution Amplifier, 75 Ohms User Manual

Page 11

background image

11

Board Installation

Use the following procedure to install the 9253 in a frame.

1. Refer to the frame User Manual to ensure that the frame is properly installed

according to instructions.

2. After selecting the desired frame installation slot, hold the 9253 card by the

edges and carefully align the card edges with the slots in the frame. Then
fully insert the card into the frame until the rear connection plugs are properly
seated on the midplane and rear module.

This completes the procedure for installing the 9253 in the frame.