Cobalt Digital OBSIDIAN 3G 9501-DCDA-3G Downconverter - Manual (Page 35)

9501DCDA-OM (V1.3) 9501-DCDA PRODUCT MANUAL 3-7
Operating Instructions
Checking 9501-DCDA Card Information
Checking 9501-DCDA Card Information
The operating status and software version the 9501-DCDA card can be
checked using DashBoard™ or the card edge control user interface. Figure
3-4 shows and describes the 9501-DCDA card information screen using
DashBoard™ and accessing card information using the card edge control user
interface.
Note: Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-4. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-28) for corrective
action.
Figure 3-4 9501-DCDA Card Info/Status Utility
The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card is hosting a
9501-DCDA card in slot 4.
Status Display
This displays shows the status and format of the signals being
received by the 9501-DCDA, as well as card status.
Card Info Display
This displays (alternately selected in the Card Info pane) shows
the the card hardware and software version info, as well as a
Cobalt code number for the currently installed rear module.