Cobalt Digital OBSIDIAN 3G 9501-DCDA-3G Downconverter - Manual (Page 25)

9501DCDA-OM (V1.3) 9501-DCDA PRODUCT MANUAL 2-5
Installation and Setup
Installing a Rear I/O Module
RM20-9501-B Provides the following connections:
• Two 3G/HD/SD-SDI coaxial input (SDI IN A and
SDI IN B)
• Two reclocked SDI input copies (RCK OUT 1 and
RCK OUT 2)
• Four analog balanced audio outputs
(AN-AUD OUT 1 thru AN-AUD OUT 4)
• Two processed coaxial outputs (SDI/Cmpst OUT 3
and SDI/Cmpst OUT 4) (each GUI-selectable as
analog composite or SD-SDI)
RM20-9501-C/S Split Rear Module. Provides each of the following
connections for two 9501 cards:
• Two 3G/HD/SD-SDI coaxial input (SDI IN A and
SDI IN B)
• Four reclocked SDI input copies (RCK OUT 1 thru
RCK OUT 4)
• Four processed coaxial outputs (AN/SDI OUT 1
thru AN/SDI OUT 4) (each GUI-selectable as
analog composite or SD-SDI)
Note: Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9501-C/S-HDBNC or RM20-9501-C/S-DIN,
respectively.
Table 2-1 9501-DCDA Rear I/O Modules — continued
9501-DCDA Rear I/O Module Description