HON Voi - Manual (Page 4)

4
1. WORKSURFACES
A
SElECt A WORKSURFACE ShAPE.
• Choose from a variety of shapes:
- Rectangle*
- Rudder
- Saddle
- Wedge
• Rudder, Saddle, and Wedge top shapes allow the user to face outward
instead of into the corner, encouraging collaboration.
• For even more options, systems worksurfaces can be used
with Voi components in panel-supported open plan applications.
* Rectangle available in veneer or laminate.
B
SElECt A SIzE.
• Voi worksurfaces come in a variety of depths and widths to provide
solutions that work within any set of space requirements; 20 ", 24", 30",
and 36 " depths are available. Widths range from 36" to 84".
• Various depths and widths give you more options when specifying
desks for spaces of any size.
C
CONSIdER POWER ANd dAtA ACCESS.
• Softwire AC grommets can be specified in any Voi worksurface.
• Hardwire AC grommets can also be used in worksurfaces as
well as floor credenzas or low credenzas.
• Power and data ports attach to worksurfaces and can be either
soft- or hardwire. Data capabilities can be specified based on
individual requirements.
Consult your HON Pricer for complete information.
KEY GUiDELiNES
• The Rudder worksurface cannot
be a free-standing unit. It must
be used as a return or peninsula
with a single post leg.
• T-mold is not an option on
Voi worksurfaces. Edgeband
only. O-leg-to-panel brackets
cannot be used with T-mold
worksurfaces. Edgeband only.
• Edgeband color is based on the
worksurface color selection.
See chart on page 22.
• Select grommet or no grommets.
If grommets are specified, they
are positioned in a
predetermined location:
- One grommet in 36 "- 48"W
worksurfaces.
- Two grommets in 48 "- 84"W
worksurfaces.
• Systems worksurfaces can be
used (see Abound worksurface
section in the Abound pricer for
systems worksurface details).
• HWSA2 bracket kit and
HCTL182/HCT242 cantilever
HWSA2 bracket kit and
HCTL182/HCT242 cantilever
models must be specified in
addition to the worksurfaces to
work with Abound or Initiate
panels in some applications.
• If using a floating modesty, it
is not necessary to specify an
external channel.
• Hardwire Voi electrical
solutions must be connected to
the building’s power supply by
a licensed electrician.