HON Enable - Manual

Enable™ Student Desk
Technical Specifications
1
Rev. - 1/17/2011
© 2010 The HON Company
The HON Company [email protected]
200 Oak Street 866-833-8964
Muscatine, IA 52761 www.hon.com
Laminate SecurEdge Work Surface: The laminate top is
constructed of 0.75” thick particleboard with kraft backer
bottom and high pressure laminate (HPL) top cover. Edges
are 0.5” radius with a urethane (SecurEdge) bonded edge.
The 20”x26” tops are pre-drilled for installation of the
CLA45 or CLA50 book boxes and both sizes are pre-drilled
for left or right hand installation of the CLA65 backpack
hooks. Load limit on the work surface is tested to 300 lbs.
Hard Plastic Work Surface: The top is constructed of
0.625” thick molded hard plastic, comprised of 75% wood
flour which is specially formulated from 100% post
industrial recycled wood waste. Edges are 0.5” radius. The
20” x 26” tops are pre-drilled for installation of the CLA45 or
CLA50 book boxes and both sizes are pre-drilled for left or
right hand installation of the CLA65 backpack hooks. These
tops include a molded 17.25” long x 0.54” wide x 0.125”
deep pencil groove. Load limit on the work surface is tested
to 300 lbs.
KEY DIMENSIONS (nominal)
18x24
Desks
20x26
Desks
SecurEdge Top width: 24" 26"
SecurEdge Top depth: 18" 20"
Hard Plastic Top width: 24.5" 26.5"
Hard Plastic Top depth: 17.32" 19.32"
Kneespace width: 20.38" 22.38"
Kneespace depth: 15.9" 17.75"
Fixed Desks Height: 30" 30"
Adjustable Desks Height: 23 - 33" 23 - 33"