Wilwood Compact Remote Side Mount Master Cylinder - Manual (Page 2)

Minimum Mounting Requirements, Variations
.62
MAX
MIN
.62
MAX
MIN
CAP
P/N 330-7641
(FITS BOTH
SIZES)
CLAMP
P/N 260-10342
HOSE
P/N 220-10444
RESERVOIR
P/N 260-13107
(4.5 OUNCE)
P/N 260-10205
(10 OUNCE)
MOUNTING
BRACKET
P/N 250-10263
INLET ADAPTER
P/N 260-10264
2.35 (59,7)
MAX
MIN
4.58 (116,3)
3.70
(94,0)
SMALL RESERVOIR, 4.5 OUNCE, P/N 260-13107
MOUNTING BRACKET, P/N 250-10263 MASTER CYLINDER
LARGE RESERVOIR, 10 OUNCES, P/N 260-10205
2.00 (50,8)
2.70
(68,6)
1.19 (30,2) 2.22 (56,4) .41
(10,4)
.61 (15,5)
.27 (6,9)
MOUNTING
HOLE
8.84 (224,5)
3.00
(76,2)
.29 (7,4)
11/16-20 UN THD
.400 (10,2) DEEP(*)
(*) THREADED FOR OPTIONAL FITTINGS 220-11910 AND 220-12698
.90 (22,9) 2.03
(51,6)
5/16-24 THD
.33 (8,4) MOUNTING HOLE
1/8-27
NPT
OUTLET
.62
MAX
MIN
3.36 (85,2)
3.70
(94,0)
1.75
(44,5)
2.31
(58,7)
Figure 2. Remote Mounted Master Cylinder Figure 1. Direct Mounted Master Cylinder
Figure 3. Minimum Mounting Requirements for Mounting Bracket, Master Cylinder and Reservoirs
Four Different Master Cylinder Combinations Available in One Kit
Wilwood’s new short remote master cylinder combination kit can be mounted with the
reservoir on the master cylinder body “direct mount” (Figure 1), or the reservoir
positioned at a convenient remote location “remote mount” (Figure 2), and then
connected via a flexible hose.
Both versions can utilize either a large or small mount reservoir (included in the kit), as
your application warrants. Refer to Figure 3 for the minimum mounting requirements
before installation begins.
Page 2
Photographic Tip
Important and highly recommended: Take photos of brake system before disassembly and during the disassembly process. In the
event, trouble-shooting photos can be life savers. Many vehicles have undocumented variations, photos will make it much simpler for
Wilwood to assist you if you have a problem.