Wilwood Compact Remote Flange Mount Master Cylinder - Manual (Page 2)

Minimum Mounting Requirements, Variations
.88
MAX
MIN
MAX
MIN
.88
CAP
P/N 330-7641
(FITS BOTH
SIZES)
CLAMP
P/N 260-10342
HOSE
P/N 220-10444
RESERVOIR
P/N 260-10204
(7 OUNCE)
P/N 260-10205
(10 OUNCE)
MOUNTING
BRACKET
P/N 250-10263
INLET ADAPTER
P/N 260-10264
MAX
MIN
2.35 (59,7) 2.35 (59,7) 3.31 (84,1)
MAX
MIN
4.58 (116,3)
3.70
(94,0)
3.70
(94,0)
SMALL RESERVOIR, 7 OUNCE, P/N 260-10204
MOUNTING BRACKET, P/N 250-10263 MASTER CYLINDER
LARGE RESERVOIR, 10 OUNCES, P/N 260-10205
2.00 (50,8)
2.70
(68,6)
2.25
(57,2)
1.19 (30,2) 2.22 (56,4) .41
(10,4)
.61 (15,5)
.54 (13,7)
MOUNTING
HOLE
1.92 (48,8)
3.36 (85,4) 4.46 (113,3)
7.82 (198,6)
1.75 (44,5)
5/16-24 THD
.40 (10,2) MOUNTING HOLE
1/8-27
NPT
OUTLET
.88
Figure 2. Remote Mounted Master Cylinder Figure 1. Direct Mounted Master Cylinder
Figure 3. Minimum Mounting Requirements for Mounting Bracket, Master Cylinder and Reservoirs
Four Different Master Cylinder Combinations Available in One Kit
Wilwood’s new short remote master cylinder combination kit can be mounted with the
reservoir on the master cylinder body “direct mount” (Figure 1), or the reservoir
positioned at a convenient remote location “remote mount” (Figure 2), and then
connected via a flexible hose.
Both versions can utilize either a large or small mount reservoir (included in the kit), as
your application warrants. Refer to Figure 3 for the minimum mounting requirements
before installation begins.
Page 2
Photographic Tip
We suggest you take digital photos of the brake system setup before and during the disassembly procedure. This will aid in the event
that something is not compatible with the new brake components and be a valuable tool to assist in the trouble-shooting process.