Material safety data sheet – SCT-Germany DIESEL JET CLEANER User Manual
Page 3

instruction sheet.
Eye protection
Use safety glasses.
09.
Physical and chemical properties
Image
Form :
Liquid.
Colour :
Coloured. Clear.
Odour :
Like mineral oil.
Relevant safety data
Boiling point / range :
( 1013 hPa )
>
160 °C
Flash point :
>
61 °C
Brookfield
Vapour pressure :
( 50 °C )
<
100 hPa
Density :
( 20 °C )
<
1 g/cm
3
Viscosity :
( 20 °C )
<
10 mPa.s
10.
Stability and reactivity
Conditions to avoid
None, if handled according to order.
Materials to avoid
Reaction with oxidizing agents possible.
Hazardous decomposition products
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide,
smoke, oxides of nitrogen.
11.
Toxicological information
Toxicological tests
Results of the dangerous components in the product-mixture. Oral: LD 50 rat: approx.: 1500 mg/kg.
Additional toxicological information
Inhalation/eye contact: in high concentrations irritating to the mucous membranes, narcotic effect and influence on power of
reaction and loss of coordination possible.
12.
Ecological information
Details on elimination (persistance / degradibility)
The product is difficult to biologically degrade. May be separated mechanically in purification plants.
Additional ecological information
Do not empty into waters or drains.
13.
Disposal considerations
Product
In accordance with local official regulations. Pass on to an appropriate incinerating plant or depository or recycling. Recycling
possible, contact manufacturer. Contaminated packaging must be emptied of all residues and, following appropriate cleaning,
may be sent to a recycling plant. Uncleaned packaging must be disposed of in the same manner as the medium.
Waste key
MATERIAL SAFETY DATA SHEET
Page 3/5
Printing Date 04.09.2009
Reviewed on 04.09.2009