SCT-Germany DIESEL JET CLEANER - Manual (Page 2)

Wash away with soap and water and rinse.
After eye contact
Flush with plenty of water (10 - 15 min.). Call a physician.
After ingestion
Drink plenty of water. Do not induce vomiting - call a physician.
05. Fire-fighting measures
Suitable extinguishing media
Suitable extinguishing media Water haze. Sand, foam, CO2, dry extinguisher.
Unsuitable extinguishing media
Waterjet.
Special protective equipment
When extinguishing fires, use breathing apparatus with an independent source of air.
Additional information
Cool endangered containers with water in case of fire. Do not allow the quenching water into the sewage system.
06. Accidental release measures
Personal precautions
Keep away from ignition sources on account of the organic solvent content and air room well. Do not inhale vapours. Take the
precautions customary when handling chemicals.
Environmental precautions
Take up with a liquid absorbing material and proceed according to the waste disposal regulations. Do not empty into drains.
Methods for cleaning up/collecting
Remove mechanically, take-up residues with absorbing material.
07. Handling and storage
Information for safe handling
Normal precautions taken when handling chemicals should be observed. Additionally, the product should only be used in areas
from which all naked lights and other sources of ignition have been excluded.
Information about protection against explosions and fires
Take precautionary measures against static discharges.
Requirements to be met by storerooms and containers
Containers should be kept dry and sealed. Avoid heating over 50°C. Avoid cooling to under 0°C.
Further information about storage conditions
Storage class (VCI) : 3B
08. Exposure controls/personal protection
Personal protective equipment
Respiratory protection
None, but avoid breathing vapours if possible. If workplace limits are exceeded, a gas mask approved for this purpose must
be worn. Combination filter mask A2 - P2 for short-term work.
Hand protection
Solvent-resistent protective gloves must be worn. Gloves, for example PVC at least 0,8 mm thick. See protective gloves
MATERIAL SAFETY DATA SHEET Page 2/5
Printing Date 04.09.2009
Reviewed on 04.09.2009