Grain Systems Bin Accessories PNEG-1753 - Manual (Page 16)

4. Installation in Existing Tanks
16 PNEG-1753 Fall Restraint Reinforcement Kit
105'-25K Roof Fall Restraint Reinforcement Installation Instructions
for CRP-6948 (Continued)
5. Drill holes in the center collar. For a reference, See Figure 4D . The holes must be positioned
equidistant between roof rafters and as close as possible to the manway, as shown. Use CRP-6942
to aid in the setup of holes.
Figure 4D
6. Install CRP-6942 to the center collar using two (2) 1/2" x 1-1/2" grade 8 bolts (S-3728) and
nuts (S-8808). For a reference, See Figure 4E .
Figure 4E