Grain Systems Bin Accessories PNEG-1753 - Manual (Page 12)

3. Installation in Newly Constructed Tanks
12 PNEG-1753 Fall Restraint Reinforcement Kit
135'-50K Roof Fall Restraint Reinforcement Installation Instructions
for CRP-7113 (Continued)
4. Drill holes in the center collar. For a reference, See Figure 3G . The holes must be positioned
equidistant between roof rafters and as close as possible to the manway, as shown. Use CRP-7001
to aid in the setup of holes.
Figure 3G
5. Install CRP-7001 to the center collar using two (2) 1/2" x 1-1/2" grade 8 bolts (S-3728) and
nuts (S-8808). For a reference, See Figure 3H .
Figure 3H