Grain Systems Unload Augers PNEG-1079 - Manual (Page 4)

4 PNEG-1079 6", 8" and 10" Vertical Bin Unload Auger
1. Introduction
General Information
1. We reserve the right to improve our product whenever possible and practical to do so. We reserve
the right to change, improve and modify products at any time without obligation to make changes,
improvements and modifications on equipment sold previously.
2. The 6", 8" and 10" Vertical Bin Unload Augers have been designed and manufactured to give years
of dependable service. The care and maintenance of this machine will affect the satisfaction and
service obtained. By observing the instructions and suggestions we have recommended, the owner
should receive competent service for many years. If additional information or assistance should be
required, please contact the factory or the local dealer.
3. When receiving merchandise, it is important to check both the quantity of parts and their descriptions
with the packing list enclosed within each package. All claims for freight damage or shortage must
be made by the consignee within ten (10) days from the date of the occurrence of freight damage.
The consignee should accept the shipment after noting the damage or loss.
Capacity
1. The capacities may vary greatly under varying conditions. The following factors play a role in the
performance of the auger:
2. For example, a twenty-five percent (25%) moisture could cut capacity by as much as 40% under
some conditions.
• Speed • Amounts of foreign matter
• Angle of operation • Different materials
• Moisture content • Methods of feeding