Grain Systems Bin Accessories PNEG-524 - Manual (Page 10)

10 PNEG-524 Roof Exhaust Fan
3. Pre-Installation
18" and 24" Roof Fan Package
Figure 3A An 18" Roof Exhaust Fan
The model package should contain items shown in the Chart below .
NOTE: Before starting the assembly and installation of the roof exhaust fan, check to see that all items
listed on the packing slip have been received. In case of any shortages, contact the dealer. If there
is any damage from shipment, file a claim with the carrier.
Service Information
Fill in the appropriate information here for your records. This information must be available before
contacting the dealer or factory, if service is ever needed. If you have a question regarding the roof exhaust
fan, contact the dealer from whom you purchased the unit. If the dealer is unable to answer the question,
refer to the factory.
18" Roof Fan Package 24" Roof Fan Package
Roof Fan Assembly Roof Fan Assembly
Bottom Mounting Flange Manual PNEG-524
Hardware Package Fan Housing Top Plate
Manual PNEG-524 Adaptor Top, Right and Left Side
Rainhood Top, Right and Left Side
Hardware Package
Four (4) Template Parts
Fan model number: ____________________________________________________
Fan serial number: _____________________________________________________
Bin diameter: _________________________________________________________
Grain type: ___________________________________________________________
Grain depth: __________________________________________________________
Line voltage (measured): ________________________________________________
Dealer purchased from: _________________________________________________
Date purchased: ______________________________________________________