Danze D135301BT - Installation Manual - Manual (Page 3)

Operation Manual
® 2
DANZE ALWAYS RECOMMENDS THAT PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL.
1.
2.
3.
© 2008 Danze, Inc. All rights reserved.
Danze 3/4’’ Volume Control Valve Extension kit is designed to provide an additional
13/16’’ wall depth. If the back of volume control valve is more than 4 1/4’’ (108 mm)
away from the finished wall surface, you need to use the extension kit.
Remove the plaster guard from the 3/4” volume control valve.
Close water supply valves located on either side of the thermostatic mixing
valve body (turn clockwise to close).
With a socket wrench of H 13/16" (H 20 mm) and at least 2 3/4" (70 mm) in depth,
remove the on/off valve cartridge from the body. (rotate out counterclockwise).