Banks Power Boost gauge - Manual (Page 2)

GENERAL INSTALLATION PRACTICES
1.
this manual is an installation guide for all
banks dynafact boost gauges. for ease of
installation and to determine what additional
tools or materials you will need, read the entire
8–page manual before starting any work. NOTE
there are portions of the installation procedure and
certain illustrations matched to specific vehicle types.
for proper installation, select the text and
illustrations that closest correspond to your
vehicle.
2.
imPortant! anytime the vehicle is raised off its
wheels, it should be supported by safety stands or
ramps of adequate capacity for the vehicle’s weight.
never perform any work under a vehicle supported only
by its service jack or a hydraulic jack. do not use
concrete blocks or other masonry items that may
collapse under the vehicle weight.
3.
position wires and hoses away from exhaust heat,
moving parts, and sharp edges that may cause cuts
or other damage. route or tie all wires a minimum of 6
inches from hot exhaust parts; eight or more inches is
recommended where possible.
2 p.n. 96327 v.3.0