beautypg.com

Banks Power Ford Motorhomes: (Gas ’05 - 14 6.8L V-10, Class-A (30-valve) Power Systems- PowerPack, Stinger & TorqueTube systems, (Class-A) '05-12 User Manual

Page 13

background image

96377 v.7.0

13

1.

Locate the engine air filter box by

lifting the hood on the front of the

motorhome. Remove the cover by

releasing the four (4) clips on the sides

of the housing and slide the cover

toward the front of the motorhome.

2.

Remove the old air filter element

from the filter housing and replace it

with the Banks Ram-Air filter element.

Place the Banks filter element in the

right orientation and check the filter

seal is seating properly around the

housing to ensure no leakage. For

proper maintenance and service on

the Banks Ram-Air Filter, refer to

cLeAnInG AnD oILInG tHe BAnKS

RAM-AIR FILteR.

3.

Slide the tabs on the cover into the

slots on the air filter box. Press the

cover down gently and re-attach the

four (4) clips on the side to securely

clamp the cover.

-END, SECTION 3-

Section 3

RAM AIR FILTER INSTALL

See also other documents in the category Banks Power For the car: