VANCO 280714 (1x4) - Manual (Page 3)

www.vanco1.com 800-626-6445
3
FEATURES
Super IR Control
These units have the capability of being controlled via IR signals. The splitter can be controlled from the
display. This is accomplished by using an optional IR Receiver pigtail (Part # 280721) pointing away from
the display(s), which can be connected to the receiver boxes at each display. The IR Transmitter pigtail (Part
# 280720) is then connected to the splitter and pointed at the source(s). A remote control is used at the
display to select the splitter inputs and outputs.
*** These products are only compatible with Vanco’s Super HDMI IR Accessories.
Over-Current Over-Voltage Protection
The circuit boards are equipped with both over-current and over-voltage protection and automatically power
down if these are encountered. The power circuit will restore itself automatically once the excessive current or
voltage conditions are rectified.
HDMI® 1 x 8 Splitter over 2 UTP with IR
Part # 280718
• Allows 1 HDMI Source to be Connected to 8
HDMI Displays Devices over Dual Cat5e/Cat6
Cables
• Transmission Range: Extends 1080p
resolutions up to 100 ft over Cat5e Cables;
Extends 1080p resolutions up to 110 ft over
Cat6 Cables
• High Speed Chip Set that Supports 3D and 4K
x 2K
• Full HD1080P/60HZ
• HDCP Compliant
• Super IR, IR transport channel can be forward
or backward, an IR adapter and transmit and
receive pigtails are needed
• Supports Digital Audio Format, DTS-HD/Dolby-
True HD/LPCM7.1/AC3/DTS/DSD
• Unique Circuit Design Allows for Protection
against High Voltage and Peak Currents
• Tested for Compatibility with all leading HD
Video brands
• Tested with Dolby 7.1 Home Theater Systems
• Locking HDMI Compatible
• 19” Rack or Shelf Mounting
• 9V DC, UL Listed Power Supply for 1 x 8
Splitter Unit
• 1 x 8 Splitter Dimensions: 17.25”W x 2”H x
8”D
• Receiver Dimensions (8 Total): 1.75”W x
.875”H x 3.25”D