VANCO VPW-280577 - Manual (Page 6)

www.vanco1.com
888.769.4156 6
CONNECT AND OPERATE -
CONTINUED
DIP switch setting instruction:
Transmitter
Position1 Function
0
Range scaling disable.
1 Range scaling enable.
Position2 Position3 Function
0
0 1080P stereo (Using Embedded EDID) (note1)
0 1 1080P 5.1 (Using Embedded EDID) (note2)
1 0 1080P 7.1 (Using Embedded EDID) (note3)
1 1 EDID auto copy (note4)
Note1: The OP5 will use the embedded 1080p stereo EDID when the DIP switch is in this mode. The EDID will
be 1080p video and stereo audio.
Note2: The OP5 will use the embedded 1080p 5.1 EDID when the DIP switch is in this mode. The EDID will be
1080p video and 5.1 audio.
Note3: The OP5 will use the embedded 1080p 7.1 EDID when the DIP switch is in this mode. The EDID will be
1080p video and 7.1 audio.
Note4: Auto-copy the EDID data to the input port. The Transmitter unit will copy the EDID data from the
display which connected to the Receiver unit.
Receiver
Position1 Position2 Position3 Function
0
0 0 Normal mode, 8 bit color depth
0 0 1 LC mode(note1), 8 bit color depth
0 1 0 Normal mode, color depth decided by the display
0 1 1 LC mode (note1), color depth decided by the display
others Normal mode,8 bit color depth
Note1: If video appears to have noise or interference when a long coaxial cable is used or the quality of coaxial
cable is not very good, then use this mode.