Connect and operate – VANCO VPW-280577 User Manual
Page 5
www.vanco1.com
888.769.4156
5
CONNECT AND OPERATE
1. Connect the HDMI input source ( such as HD-DVD, PS3, STB, etc.) to the Transmitter unit.
2. Connect a CATV coaxial cable from COAX output of the Transmitter to the COAX input of the Receiver.
3. Connect the HDTV display ( such as HD-LCD,HD-DLP) to the HDMI output of the Receiver.
4. Connect the IR TX pigtail into Transmitter unit; connect the IR RX pigtail into the Receiver unit.
5. Or for reverse operation, connect the IR RX pigtail into the Transmitter unit; connect the IR TX pigtail into
Receiver unit.
Attention: Please insert and extract cables gently.
Coax Cable
See also other documents in the category VANCO Accessories for video:
- VPW-280759 (32 pages)
- 280512 (1 page)
- WMART3760 (2 pages)
- VPW-280795 (8 pages)
- VPW-280772 (4X2) (8 pages)
- 280502 (8 pages)
- SPRO2342 (2 pages)
- 280714 (1x4) (12 pages)
- WM2342F (4 pages)
- VPW-280767 (8 pages)
- 280715 (100ft wall plate) (12 pages)
- VPW-280709 (8X8) (20 pages)
- WM2342T (4 pages)
- VPW-280782 (1x2) (12 pages)
- 280711 (3x1) (12 pages)
- Rapid Link with Surge (2 pages)
- WMART2337 (2 pages)
- 280535 (1 page)
- ART4270 (4 pages)
- VPW-280754 (20 pages)
- 280515 (1 page)
- VPW-280608 (8 pages)
- WM3665T (4 pages)
- 280341 (2 pages)
- VPW-280572 (12 pages)
- SMA3000 (4 pages)
- WMT2342 (2 pages)
- 280702 (1x2) (12 pages)
- WM1024 (4 pages)
- VPW-280781 (8 pages)
- WM1024E (4 pages)
- VPW-280789 (4X4) (8 pages)
- 280548 (Additional Receiver) (8 pages)
- 280531 (1 page)
- LCD1440 (4 pages)
- 280546 (1000 ft.) (8 pages)
- 280745 (2 pages)
- WMART2342 (2 pages)
- Super IR Accessories (1 page)
- WM3665F (4 pages)
- VPW-280794 (8 pages)
- VPW-280791 (8 pages)
- VPW-280755 (20 pages)
- WMF2342 (2 pages)