DeLOCK 89016 - Manual (Page 4)

- -
Install parallel interface:
4. The hardware assistant appears with a newly found parallel interface.
5. Choose “Install software automatically” and click “next”.
6. Click “Finish”.
7. Choose “Install software automatically” and click “next”.
8. Click “Finish”.
9. Your PCI card is installed and ready for use.
Windows 2000
1. After installing the hardware and starting your computer the hardware
assistant will appear.
2. Put the driver CD in the CD ROM drive and click on "next".
3. Please choose “Search for a suitable device driver” and click on "Next".
4. Select the “CD drive” option and click on "next".
5. After the driver is located, click on "next".
6. Click “Finish”.
7. Your PCI card is installed and ready for use.
Windows 98/98SE/ME
1. After installing the hardware and starting your computer the hardware
assistant will appear.
2. Put the driver CD in the CD ROM drive and click on "next".
3. Choose "select the best driver" and click on "next".
4. Choose the option “CD ROM drive” and choose the path: “CDROM\NetMos\
NM9815\Win98“ and click “OK”.
5. Click on "next", the driver will be installed.
6. Click “Finish”.
7. Your computer will ask to reboot. Click "yes" to restart the computer.
8. After restart you can start using the device immediately.