DeLOCK 89016 - Manual (Page 2)

- -
Description
The DeLock PCI card expands your PC by two external parallel Ports. You can
connect devices like scanner, printer etc. to the card.
Specification
• 1 x DB25 parallel port
• 1 x Pin header, with rear bracket with one DB25
• SPP, PS2, EPP, ECP compatible IEEE 1284
• FIFO: 16 byte
• Data transfer rate up to 1.5 Mbps
• Plug & Play
• Automatically selects IRQ and I/O
• Supports PCI IQR sharing
• 32-Bit PCI standard 2.1
• for Windows 98SE/ME/2000/NT4.0/XP, Linux, DOS
System requirements
• PC with one free PCI Slot and one rear slot
• Windows 98SE/ME/2000/NT4.0/XP, Linux, DOS
Package content*
• PCI card + rear bracket
• Driver CD
• User manual
*Make sure that the product package contains all items before operation. If any
item is missing or damaged, then please contact your dealer immediately.
Hardware Installation
Note:
Follow the general instructions for installation of the card. If necessary, read the
manual of your computer, or ask a specialist for help.
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the slot holder from the available PCI slot and the rear slot for the
parallel port.
4. Before you can insert the Card into the PCI slot, please connect the parallel
port of the rear bracket to the PCI card.
5. Insert the card straight and carefully into the free PCI slot, until it is well