DeLOCK 89016 - Manual (Page 3)

- -
seated.
6. Use a screw to attach the card to the housing.
7. Fix the rear bracket with a screw also on the housing.
8. Reattach the housing, and connect the power cord to the AC adapter.
9. Switch on your computer.
Driver Installation
Windows XP Service Pack 2
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant will appear. Choose the option “No, not this time” and click “next".
2. Put the driver CD in the CD-ROM drive, choose “Install software
automatically” and click “next”. Click “next”.
3. The driver will be found automatically and installed. Click on "Finish".
Install parallel interface:
4. The hardware assistant appears with a newly found parallel interface.
Choose “No, not this time” and click “Continue”.
5. Choose “Install software automatically” and click “next”.
6. Click “Finish”.
7. Choose “Install software automatically” and click “next”.
8. Click “Finish”.
9. Your PCI card is installed and ready for use.
Windows XP Service Pack 1
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant will appear.
2. Put the driver CD in the CD-ROM drive, choose “Install software
automatically” and click “next”. Click “next”.
3. The driver will be found automatically and installed. Click on "Finish".