Velleman LEDA313 - Manual (Page 7)

LEDA308/309/310/311/311B/312/312B/313B
V. 01 – 07/01/2014 7 ©Velleman nv
The housing, the visible parts, the mounting supports and the installation
location (e.g. ceiling, suspension, trussing) should not be deformed,
modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
If the protective glass [2] is damaged, disconnect the lamp immediately
from the mains. Have it repaired immediately by a qualified technician.
Do not use the lamp with a cracked or broken protective glass.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol
or solvents.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
8. Technical Specifications
LEDA308 LEDA309
housing colour grey
power supply 85–265 VAC / 50–60 Hz
max. power 10 W 20 W
LED 10 W 105LM/W Epistar chip 20 W 105LM/W Epistar chip
colour
temperature
6500 K
beam angle 90°
luminous flux 680 lm 1355 lm
light efficiency 58 lm/W
dimensions 185 x 165 x 55 mm
weight 1.15 kg
LEDA310
housing colour grey
power supply 85–265 VAC / 50–60 Hz
max. power 30 W
LED 30 W 105LM/W Epistar chip
colour temperature 6500 K
beam angle 90°
luminous flux 2043 lm
light efficiency 61 lm/W
dimensions 290 x 250 x 80 mm
weight 2.85 kg