Step 5 – reconnect the connector cable, Wiring, Operation – Velleman LEDC14 User Manual

Page 5: On/off, Dimmer mode, Technical specifications

LEDC14

V. 01 – 28/03/2013

©Velleman nv

Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.

 Insert the cable and close the connector.

You can now close the touch panel.

5. Wiring
For dimmer mode, wire the controller as follows:

6. Operation
On/Off
To turn the lights on or off, press

Dimmer mode
 To increase brightness, press

 To decrease brightness, press

7. Technical Specifications

power supply

12 - 24 VDC

maximum load

3 x 4 A

PWM frequency

± 900 Hz