Velleman VM130T infosheet - Manual

Transmitter instructions
changing the code - returning to the default code
VM130T
i
VELLEMAN NV - Legen Heirweg 33 - 9890 Gavere - Belgium Europe
The transmitter comes with a factory default code.
However, for security reasons, it might be wise not to use
the default code.
SW3
SW1
SW2
LED
1. Open the enclosure.
2. Hold SW1 (left button)
3. Briefly press the 'program'-button (SW3) 3 times. The
LED will flash 3 times.
4. Release SW1.
5. Your unique 32-bit code has been generated and
stored.
1) Open the enclosure :
open
SW1= CHANNEL 1, SW2= CHANNEL
2) Changing the code :
CH
A
N
GI
NG THE CODE
CH
A
N
GI
NG THE CODE
1. Open the enclosure.
2. Hold SW1 (left button).
3. Hold the 'program'-button (SW3). After +/- 10s the led
will flash 5 times.
4. Release both buttons.
5. Your code has been reset to the default code.
2) Return to the default code :
RETURN T
O
THE
RETURN T
O
THE
DEF
A
U
LT CODE
DEF
A
U
LT CODE
1) Open the enclosure :
open
SW1= CHANNEL 1, SW2= CHANNEL 2