Velleman VDSMB15 - Manual (Page 3)

VDSMB14/15 HQPOWER ® 3
100V consideration - only applicable to 100V tap speaker
The 100V transformer offers you the ability to daisy-chain multiple numbers of
speakers in series. In doing so, you would simply connect 1 pair of outputs to each
speaker and daisy-chain to subsequent speakers. If you do not intend to daisy-chain
the speakers, set the default setting to 8Ω.
3. Technical Specifications
VDSMB14 VDSMB15
Woofer 4” polypropylene 5 ¼” polypropylene
Tweeter ½” Mylar ® dome
Power 100W max./30W RMS 120W max./35W RMS
Power Line 100/70V 2/4/8/16W
Frequency Response 80Hz ~ 20,000Hz 50Hz ~ 20,000Hz
Sensitivity 88dB @ 1W/1m 89dB @ 1W/1m
Impedance 8Ω 16Ω
Dimensions
135 x 205 x 136mm 163 x 239 x 160mm
Weight 1.4kg 1.9kg
Refer to the Velleman® Service and Quality Warranty on the last pages of this
manual.
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of
this device. For more info concerning this product, please visit our website
www.hqpower.eu. The information in this manual is subject to change without
prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman
Components nv. All worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.