Milton CAT 14M - Manual (Page 15)

Moldboard Options. A 4.3 m (14 ft)
moldboard is standard on the 14M, with
an optional 4.9 m (16 ft) moldboard
available from the factory. Left and
right side moldboard extensions are
also available, increasing versatility.
Ground Engaging Tools (GET). A wide
variety of Caterpillar GET is available
on the 14M, including cutting edges,
graderbits and end bits, all designed for
maximum service life and productivity.
Front Mounted Groups. A front mounted
push plate/counterweight can be ordered
on the 14M. The Caterpillar Work Tools
front lift group can be combined with a
front dozer blade or front scarifier for
added versatility.
Ripper. The 14M optional ripper is made
to penetrate tough material fast and rip
thoroughly for easier material movement
with the moldboard. The ripper includes
three shanks with the ability to add four
more if needed.
Snow Removal Work Tools. Caterpillar
Work Tools offer a variety of snow
removal equipment specifically for the
14M. Multiple snow plow, snow wing
and mounting options are available,
adding additional machine versatility
and utilization throughout the year.
Automatic Lubrication System.
The optional Lincoln Automatic
Lubrication System maintains the
proper grease lubrication on working
surfaces, significantly extending
component life. Contaminants are
purged from open pins and bushings
to help prevent dirt from damaging
critical components.
Air Compressor. An optional air
compressor is available, giving you a
convenient on-board air system to blow
debris off the machine and operate
power tools.
Fast-Fill Fuel Option. The 14M offers a
Fast-Fill option allowing customers to
refuel in less than two minutes for fast,
accurate filling and reduced downtime.
15
Work Tools and Attachments
The Work Tools and optional attachments for the 14M expand machine versatility,
utilization and performance.