Milton CAT CB-564D - Manual (Page 6)

6
Operator’s Station
Ergonomically designed for maximum operator productivity and unmatched comfort.
Comfortable Operating Environment
The console and instrumentation move
with the operator, staying in the same
relative position to the operator.
Multi-Position Operator’s Station
The operating station has nine rotating
and seven sliding positions, maximizing
comfort.
Multi-Function Propel Handle
The multifunction propel handle
simplifies operation with the following
controls: propel speed, vibe on/off,
water spray on/off, horn and optional
drum offset.
Steering Console
The entire console tilts for simple
entrance and exit. A lockable vandal
cover is provided for the console.
Comfortable and Durable Seat
The seat has adjustable fore/aft
position, suspension stiffness, and
flip-up arm rests with a 76 mm (3")
wide retractable seat belt.
Isolated Operator’s Station
The operator’s station with four,
heavy-duty rubber mounts reduce
machine vibration to the operator.
Automatic Speed Control
A speed control dial located on the
operator’s console simplifies operation
by allowing the operator to preset the
machine speed or impact spacing.
The speed control dial allows the
operator to push the propel lever to the
forward or reverse positions while
repeating the desired speed or impact
spacing.
For FOPS protection to be effective, the operator must be seated under the canopy.
Automatic Speed
Control Dial