Milton CAT 302.5C - Manual (Page 8)

8 302.5C Mini Hydraulic Excavator specifications
Swing System
Type Hydraulic motor-driven
Machine swing speed 9.5 rpm
Boom swing – left (without stop) 90º
Boom swing – left (with stop) 54º
Swing – right 48º
• Automatic swing brake, spring applied, hydraulic release.
• Centralized lubrication.
Sound Levels
Canopy 81 dB(A)
Cab 81 dB(A)
• Operator sound pressure levels measured per ISO 6396
(dynamic).
Electrical System
• 50-amp alternator
• 12-volt, 650 CCA, 52 amp/h
• Sealed electrical connectors
Blade
Width 1450 mm 57.1 in
Height 320 mm 12.6 in
Dig depth 420 mm 16.5 in
Lift height 285 mm 11.2 in
Service Refill Capacities
Cooling system 4.5 L 1.2 gal
Engine oil 6.4 L 1.7 gal
Fuel tank 38 L 10 gal
Hydraulic tank 36 L 9.5 gal
Hydraulic system 50 L 13.2 gal
Engine
Model Mitsubishi S3L2 NA Diesel
Rated net power (ISO 9249) 18.6 kW 24.9 hp
Gross power 19.9 kW 26.7 hp
• Meets U.S. EPA Interim Tier 4 emissions requirements.
• Ratings at 2,300 rpm.
Weights
Operating weight with canopy 2745 kg 6,052 lb
Operating weight with cab 2850 kg 6,283 lb
• Weight with rubber tracks, bucket, operator, full fuel and
auxiliary lines.
• Weight varies depending on machine configuration.
Engine Dimensions
Bore 78 mm 3.07 in
Stroke 92 mm 3.62 in
Displacement 1.3 L 80.4 in 3
Travel System
Travel speed – high 5 km/h 3.1 mph
Travel speed – low 2.5 km/h 1.6 mph
Max traction force – high speed 12.4 kN 2,788 lbf
Max traction force – low speed 23.6 kN 5,305 lbf
Gradeability (max) 30º
Hydraulic System
Pump – gear (tandem) 31.2 L/min 8.2 gal/min
Pump – gear (single) 18.4 L/min 4.9 gal/min
Operating pressures – equipment 221 bar 3,205 psi
Operating pressure – travel 221 bar 3,205 psi
Operating pressure – swing 174 bar 2,524 psi
Auxiliary circuits – Primary 64 L/min 16.9 gal/min
(174 bar/2,524 psi)
Auxiliary circuits – Secondary 14.4 L/min 3.8 gal/min
(174 bar/2,524 psi)
Digging force – Stick, 15.3 kN 3,440 lbf
standard
Digging force – Stick, long 13.1 kN 2,945 lbf
Digging force – Bucket 24.2 kN 5,440 lbf