Milton CAT 140M - Manual (Page 17)

Moldboard Options. A 3.7 m (12 ft)
moldboard is standard on the 140M,
with an optional 4.3 m (14 ft) moldboard
available from the factory. Left and right
side moldboard extensions are also
available, increasing versatility.
Ground Engaging Tools (GET). A wide
variety of Caterpillar GET is available
on the 140M, including cutting edges,
graderbits and end bits, all designed for
maximum service life and productivity.
Front Mounted Groups. A front mounted
push plate/counterweight or front lift
group can be ordered on the 140M.
The Caterpillar Work Tools front lift
group can be combined with a front
dozer blade or front scarifier for
added versatility.
Rear Ripper/Scarifier. The 140M optional
ripper/scarifier is made to penetrate tough
material fast and rip thoroughly for easier
material movement with the moldboard.
The ripper includes three shanks with
the ability to add two more if needed.
Nine scarifier shanks can also be
added for additional versatility.
Snow Removal Work Tools.
Caterpillar Work Tools offer a variety
of snow removal equipment specifically
for the 140M. Multiple snow plow, snow
wing and mounting options are available,
adding additional machine versatility
and utilization throughout the year.
Automatic Lubrication System.
The optional Lincoln Automatic
Lubrication System maintains the proper
grease lubrication on working surfaces,
significantly extending component life.
Contaminants are purged from open
pins and bushings to help prevent dirt
from damaging critical components.
Air Compressor. An optional air
compressor is available, giving you
a convenient on-board air system to
blow debris off the machine and
operate power tools.
Fast-Fill Fuel Option. The 140M offers
a Fast-Fill option allowing customers to
refuel in less than two minutes for fast,
accurate filling and reduced downtime.
17